Advertisement
PRODUCT CONNECTIONS AND USE
1.
Remove the end of the HDD case
containing the USB3.0 cable socket
(here on referred to as the "header")
Note: Ensure any fastening screws
have been removed from the
header
2.
Gently remove, then connect the
header to your HDD, being
careful not to touch any of the
electronic connection surfaces
3.
Screw the header to the HDD and
slide the HDD and header, together,
back into the case. This should
require little to no force.
4.
Once the header and HDD have seated
correctly into the case housing, screw
the fastening screws into the side
of the unit.
FEATURES AND OPERATION
System Requirement
Operation system: Windows XP /Vista /Win7
Features
Suitable for 2.5" SATA HDD
USB3.0 to SATA interface
Transfer rate max up to 5Gb/s
Backwards compatibility with USB 2.0 (480Mbps)
Plug & Play supported
Power Supply: Mains power adaptor
For further product information and instruction please visit our product web page at
www.laserco.net
or email
Please note: As continual improvements are made to this product, slight operational differences may
occur. For the most up-to-date user manual, please visit our web site.
CASE-3S3
support@laserco.com.au
QUICK START GUIDE
1
Advertisement
Table of Contents
Related Manuals for Laser CASE-3S3
Summary of Contents for Laser CASE-3S3
- Page 1 CASE-3S3 QUICK START GUIDE PRODUCT CONNECTIONS AND USE Remove the end of the HDD case containing the USB3.0 cable socket (here on referred to as the “header”) Note: Ensure any fastening screws have been removed from the header Gently remove, then connect the...
- Page 2 Step 3: Laser . will issue you with a Return Authorisation (RA) number within 48 hours. When requested, send us the defective Product and a copy of your receipt. Laser will cover the cost of the return delivery. Step 4: Wait for us to contact you.
Need help?
Do you have a question about the CASE-3S3 and is the answer not in the manual?
Questions and answers