Download Print this page

HP Deskjet F300 User Manual: Software Installation Troubleshooting

Hp deskjet f300: user guide.
Hide thumbs

Advertisement

If the HP All-in-One and computer are not communicating with each other, try the
following:

Software installation troubleshooting

If you encounter a problem during software installation, see the topics below for a
possible solution. If you encounter a hardware problem during setup, see
setup
troubleshooting.
During a normal installation of the HP All-in-One software, the following events occur:
1.
The HP All-in-One software CD-ROM runs automatically.
2.
The software installs.
3.
Files are copied to your computer.
4.
You are requested to connect the HP All-in-One to your computer.
5.
A green OK and check mark appear on an installation wizard screen.
6.
You are requested to restart your computer.
7.
The registration process runs.
If any of these things did not occur, there might be a problem with the installation.
To check the installation on a Windows computer, verify the following:
Start the
appear:
immediately, you might need to wait a few minutes for the HP All-in-One to
connect to your computer. Otherwise, see
HP Solution Center
Open the
Look in the system tray at the far right of the Windows taskbar for an HP All-in-
One icon. This indicates that the HP All-in-One is ready.
When I insert the CD-ROM into my computer's CD-ROM drive, nothing happens
Solution
To start the installation from a Windows computer
1.
From the Windows
2.
In the
If your CD-ROM drive is not assigned to drive letter D, enter the appropriate
drive letter.
To start the installation from a Mac
1.
Double-click the CD icon on your desktop to view the contents of the CD.
2.
Double-click the installation icon.
User Guide
HP Solution Center
and check to make sure the following buttons
Scan Picture
and
Scan
(Windows).
Printers
dialog box and check to see that the HP All-in-One is listed.
If the installation does not run automatically, you can start it manually.
Start
menu, click Run.
Run
dialog box, enter d:\setup.exe, and then click OK.
Document. If the icons do not appear
Some of the buttons are missing in the
Hardware
41

Advertisement

Troubleshooting

Comments to this Manuals

Symbols: 0
Latest comments: