The Main screen (touch screen)
1 Getting started
PRINTER switches the engine operation mode to printer. This key does not
function at present.
SCANNER switches the engine operation mode to scanner.
COPY switches the engine operation mode to copy.
Timer lights when the timer function is set.
10 Interrupt stops copying in progress to allow copying from the scanner glass.
11 Sleep On/Off activates power-saving mode for times when the MFP is inactive,
or activates Timer Interrupt mode when the Weekly Timer function is active.
12 Stop key stops the copying sequence and deletes the stored memory.
13 Proof Copy outputs a single set of copies to confirm whether the current
settings are selected properly.
14 Start activates copying or scanning.
15 (C) (Clear) allows resetting of print quantity.
16 (P) (Counter) displays the Counter screen or accesses programming modes for
setting special functions.
17 Reset restores the MFP to automatic mode settings or to Key Operator settings.
18 Job Memory displays screens for selecting job memory/job recall functions.
19 Access sets the engine to allow copying only when the Copy monitor password
FREE JOB is selected to specify copy job conditions.
When scanning starts, FREE JOB changes to SCAN JOB, and then changes to
PRINT JOB when the engine starts printing.
FREE JOB at the right side of SCAN JOB or PRINT JOB can be touched to
specify reserve job conditions. Up to nine reserve jobs can be set. The arrow
keys at the right side of folder keys are used to scroll.