Automatic Setup
Using the Auto button and the test pattern on the CD-ROM provided, you
can easily optimize your screen performance.
1 Insert the CD-ROM provided into the PC. Run the program
to display a pattern used for setup.
2 Press the Auto button. Normally, this should produce a stable,
centered image.
Your optimizer utility also contains driver for Windows 95, Windows 98 or
Windows 2000
Manual Setup
Follow these steps only if further adjustments are needed. For further
information, refer to "Using Your Monitor" on page 12
1 Display the pattern using the CD-ROM as described above.
2 Press Enter to display the OSD menu.
3 Select the Geometry icon.
4 Select Pixel Clock and adjust the value to minimize vertical
bars.
5 Select Phase
and adjust the value to minimize horizontal bars.
6 Select Horizontal Position and
to adjust screen position.
7 Press the Exit button to save the values.
HP L1510 15" LCD Monitor
Adjusting Your Monitor
.
Vertical Position
English
English
11