Important
5. Replace the RAM cover.
6. Reinstall the notebook's battery.
To remove a RAM expansion module
1. Turn off the notebook: click Start, Turn Off Computer, Turn Off.
2. Important: unplug the AC adapter (if present) and remove the notebook's battery.
3. On the bottom of the notebook, loosen the screw holding the RAM cover (the cover
retains the screw), and remove the cover.
4. Release the two latches at the sides of the RAM expansion module by pushing them
gently outward (away from the sides of the module). When you release the latches, the
free edge of the module pops up.
5. Pull the module out of the connector.
The notebook will not operate without at least one RAM module installed.
6. Replace the RAM cover.
7. Reinstall the notebook's battery.
Add-On Devices
Installing Additional RAM
Reference Guide
75