Table of Contents
Advertisement
Number of flashes that will activate over-temperature protection:
Power Output Level
Number of Flashes
1/1
30
1/2 +0.7
40
1/2 +0.3
50
1/2
60
1/4(+0.3,+0.7)
100
1/8(+0.3,+0.7)
200
1/16(+0.3,+0.7)
300
1/32(+0.3,+0.7)
500
1/64(+0.3,+0.7)
1000
1/128(+0.3,+0.7)
Number of flashes that will activate over-temperature protection in
high-speed sync triggering mode:
Power Output
Times
1/1
15
1/2(+0.3,+0.7);
20
1/4(+0.3,+0.7)
30
1/8(+0.3,+0.7);
1/16(+0.3,+0.7)
40
2. Other Protections
The system provides real-time protection to secure the device and
your safety. The following lists prompts for your reference:
Meaning
Prompts on LCD Panel
E1
A failure occurs on the recycling system so that the
flash cannot fire.
Please restart the flash unit. If the problem still exists,
please send this product to a maintenance center.
E3
The voltage on two outlets of the flash tube is too high.
Please send this product to a maintenance center.
There are some errors occurred during the upgrading
E9
process. Please using the correct firmware upgrade
method.
Firmware Upgrade
This flash supports firmware upgrade through the USB port. Update
information will be released on our official website.
USB connection line is not included in this product. The USB
port is a standard Micro USB socket. Common USB
connection line is applicable.
Checking the version: Press the <MODE> Button and the turn
the flash on. Then, the firmware update version (e.g. Version
1.0 will read U-1.0) will be displayed on the LCD panel.
- 45 -
Technical Data
Model
TT350F
• Type
Compatible Cameras
FUJI cameras
(Please reference to compatible camera models)
Guide No.
36 (m ISO 100)
(1/1 output @ 105mm)
Flash Coverage
24 to 105mm (135 format)
• Auto zoom (Flash coverage set automatically
to match the lens focal length and image size)
• Manual zoom
• Swinging/tilting flash head (bounce flash): 0 to 270°
horizontally and -7° to 90° vertically
Flash Duration (t0.1)
1/350 to 1/20000 seconds
• Exposure Control
Exposure control system
TTL autoflash and manual flash
Flash exposure
Manual. FEB: ±3 stops in 1/3 stop increments
compensation (FEC)
(Manual FEC can be combined.)
Sync mode
High-speed sync (up to 1/8000 seconds),
first-curtain sync, and second-curtain sync
Multi flash
Provided (up to 90 times, 90Hz)
• Wireless Flash (2.4G radio transmission)
Wireless flash function
Master, Slave, Off
Controllable slave groups
3 (A, B and C)
≤30m
Transmission range
(approx.)
Channels
16 (1~16)
• Auto Focus Assist Beam
Effective range (approx.)
Center: 0.6~4m
Periphery: 0.6~2.5m
• Power Supply
Ni-MH batteries (recommended) or 2*LR6 alkaline batteries
AA batteries
Approx. 0.1-2.2 seconds (eneloop Ni-MH batteries
Recycle time
of Panasonic). Red LED indicator will light up when
the flash is ready.
Full power flashes
Approx. 210 (2500mA Ni-MH batteries)
Power saving
Power off automatically after approx. 90 seconds
of idle operation. (60 minutes if set as slave)
• Sync Triggering Mode
Hotshoe, optic triggering
• Dimensions
W x H x D
140*62*38 mm
Weight without battery
210g
- 46 -
Advertisement
Table of Contents
