13 Changing QuickWeb settings
Disabling and enabling QuickWeb
To disable or reenable QuickWeb from within the Windows operating system:
1.
Select Start > All Programs > HP QuickWeb. The HP QuickWeb Installer folder is displayed.
Click HP QuickWeb Configuration Tool.
2.
Select the Enable QuickWeb check box.
3.
Click OK.
NOTE:
Control Panel, and then clicking Switch to Classic View. Select Large icons or Small icons to
locate the HP QuickWeb Configuration Tool.
The HP QuickWeb Configuration Tool can also be accessed by clicking Start, clicking
Disabling and enabling QuickWeb
77