Subwoofer - HP Envy 17-1190 Maintenance And Service Manual

Subwoofer

Description
Subwoofer (includes cable)
Before removing the subwoofer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Hard drive cover (see
b. memory module compartment cover (see
c. Keyboard (see
d. Top cover (see
e. System board (see
Remove the subwoofer:
1. Release the wireless antenna cables from the clips built into the subwoofer (1) and the base
enclosure (2).
2. Remove the three Phillips PM2.5×5.0 broad head screws (3) that secure the subwoofer to the
base enclosure.
70 Chapter 4 Removal and replacement procedures
Battery on page 38), and then remove the following components:
Primary hard drive on page
Keyboard on page 51)
Top cover on page 53)
System board on page
39)
Memory module on page
61)
Spare part number
603800-001
43).