Adding Or Replacing A Memory Module In Single-Slot Models - HP Envy 15-1270 User Manual

Hp envy 15-1270: user guide
Hide thumbs Also See for Envy 15-1270:
Table of Contents

Advertisement

Adding or replacing a memory module in single-slot
models
To add or replace a memory module:
1.
Save your work.
2.
Shut down the computer and close the display.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by briefly
pressing the power button. Then shut down the computer through the operating system.
3.
Disconnect all external devices connected to the computer.
4.
Unplug the power cord from the AC outlet.
5.
Turn the computer upside down on a flat surface.
6.
Remove the battery from the computer.
7.
Loosen the memory module compartment cover screws (1) and lift the memory module
compartment cover (2) away from the computer.
8.
Remove a memory module in the memory module slot:
a.
Pull away the retention clips (1) on each side of the memory module.
CAUTION:
edges only. Do not touch the components on the memory module.
To prevent damage to the memory module, hold the memory module by the

Adding or replacing a memory module in single-slot models

71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Envy 15

Table of Contents