Removal and Replacement Procedures
5.7 RTC Battery
RTC battery (includes 2-sided tape)
1. Prepare the computer for disassembly (refer to
2. Remove the memory module compartment cover
(Section
3. Disconnect the RTC battery cable 1 from the system board.
4. Remove the RTC battery 2.
✎
The RTC battery is secured to the computer by 2-sided
tape. All replacement RTC battery spare part kits include
2-sided tape.
Removing the RTC Battery
Reverse the above procedure to install the RTC battery.
5–14
RTC Battery Spare Part Number Information
5.6).
Maintenance and Service Guide
431436-001
Section
5.3).