Displaying System Information - HP Compaq Presario,Presario V2000 Hardware And Software Manual

Software Updates and Recovery and System Software

Displaying System Information

The following procedure explains how to display system
information in the Setup utility. If the Setup utility is not open,
begin at step 1. If the Setup utility is open, begin at step 2.
1. To open the Setup utility, turn on or restart the notebook in
Windows, and then press
to enter setup" is displayed in the lower-left corner of the
screen.
2. Access the system information on the Main and Advanced
menus.
❏
❏
3. To close the Setup utility without changing any settings, use
the arrow keys to select the Exit menu > Exit Discarding
Changes, and then press
Windows.)
8–14
To display most of the system information available in the
Setup utility, use the arrow keys to select the Main menu.
To display video memory information, use the arrow keys
to select the Advanced menu.
while the prompt "Press <F10>
f10
. (The notebook restarts in
enter
Hardware and Software Guide