3. Turn the notebook upside down with the front toward you.
4. Position the top cover with the front toward you.
5. Remove the four PM2.0×7.0 screws 1 that secure the system
board to the top cover.
6. Remove the two SM1.5×8.0 shoulder screws 2 on each side
of the expansion port 2 connector that secure the system
board to the top cover.
✎
Step 7 applies only to Compaq Presario R4000 models.
7. Disconnect the LED cable 3 from the system board.
Removing the System Board Screws
Maintenance and Service Guide
Removal and Replacement Procedures
5–69