Restore To A Previous Date And Time; Creating Recovery Discs - HP Compaq Presario,Presario B1201 Maintenance And Service Manual

Restore to a previous date and time

Select Start > Control Panel > System and Maintenance > System.
1.
In the left pane, click System protection.
2.
Click the System Protection tab.
3.
Click the System Restore button, and then click Next.
4.
The System Restore window opens.
Follow the on-screen instructions.
5.

Creating recovery discs

Recovery Manager creates a set of recovery CDs or DVDs for the computer. Use recovery discs to restore
the operating system and software programs to factory settings, in case of system failure or instability.
NOTE:
Handle these discs carefully and keep them in a safe place. The software allows the creation of
only one set of recovery discs.
Note the following guidelines before creating recovery discs:
You will need high quality CD-R, DVD-R, or DVD+R media (purchased separately).
●
NOTE:
Recovery Manager software.
The computer must be connected to AC power during this process.
●
Only one set of recovery discs can be created per computer.
●
Number each disc before inserting it into the computer optical drive.
●
If necessary, you can exit the program before you have finished creating the recovery discs. The next
●
time you open Recovery Manager, you will be prompted to continue the disc creation process.
To create a set of recovery discs:
Select Start > All Programs > Recovery Manager > Recovery Manager.
1.
Recover Manager opens.
Click Advanced Options.
2.
NOTE:
AC power before you can go to the next step.
Click Recovery disc creation, and then click Next.
3.
Follow the on-screen instructions.
4.
116 Chapter 8 Backup and Recovery
Formatted DVD±RW discs and DVD±RW double-layer discs are not compatible with the
If you are operating the computer on battery power, you will be prompted to connect to