Compaq Global Mini PCI 56k (V.90) Modem by 3Com
S15
Bitmapped Register
Selects the data bit(s) you want the modem set on, and sets S13 to the total of the Value
column. For example, ATS13.0=17 enables bit 0 (value 1) and bit 4 (value 16).
S16
Bitmapped Test Register
Selects the data bit(s) you want the modem set on, and sets S13 to the total of the Value
column. For example, ATS13.0=17 enables bit 0 (value 1) and bit 4 (value 16).
S18
Test Timer
Sets the length of time, in seconds, that the modem conducts a test before returning to the
command mode. When this register value is zero, the test will not automatically
terminate. The test must be terminated from the command mode by issuing the &T0 or H
command.
S19
Inactivity Timer
Sets the duration, in minutes, for the inactivity timer. The timer activates when there is
no data activity on the phone line; at time-out the modem hangs up. A setting of 0
disables the timer function.
S19=0 disables the timer.
0203-0799-A
1 = MNP/V.42 disabled in V.22
2 = MNP/V.42 disabled in V.22bis
4 = MNP/V.42 disabled in V.32, V.34
8 = Disable MNP handshake
16 = Disable MNP level 4
32 = Disable MNP level 3
2:
Dial test
Range:
2
Default:
0
Range:
0 - 255
Default:
0
Units:
Seconds
Range:
0 - 255
Default:
0
Units:
Minutes
29
White Paper