Hardware and Software Setup
Å
WARNING: This notebook is designed to run demanding
applications at full power. As a result of increased power
consumption, it is normal for the notebook to feel warm or hot when
used continuously. To avoid potential discomfort or burns, do not
block the air vents or use the notebook on your lap for extended
periods. The notebook complies with the user-accessible surface
temperature limits defined by the international Standard for Safety
of Information Technology Equipment (IEC 60950).
Because of limitations in current TFT manufacturing technology,
TFT displays may show imperfections as bright, dim, or dark
spots. HP does not guarantee that TFT displays (available on
selected models only) are free from such imperfections.
Setting Up the Hardware
CAUTION: To ensure that the correct drivers load and to prevent file
corruption or damage to the components during initial setup:
Do not set up the notebook while it is docked in an optional Port
Replicator.
Do not remove the battery pack until the notebook has been
connected to external AC power.
Run the notebook on external AC power, not on battery power,
throughout initial setup.
Getting Started
1
1–1