Using an Internal Modem
Using a Country-Specific Modem Cable Adapter
Software for the internal modem supports multiple countries, but
telephone jacks vary by country. To use the modem and the RJ-11
cable outside the country in which you purchased the notebook,
you must obtain a country-specific modem adapter and define
your location in Dialing Properties.
To connect the modem to an analog telephone line that does not
have an RJ-11 telephone jack:
1. If the modem cable has noise suppression circuitry 1 , orient
the circuitry end of the cable toward the notebook.
2. Plug the modem cable into the RJ-11 telephone jack 2 on the
notebook.
3. Plug the country-specific modem adapter 3 into the
telephone jack.
4. Plug the modem cable 4 into the country-specific modem
adapter.
Connecting the modem using a country-specific modem
adapter
1–4
Modem & Networking