Download Print this page

HP Compaq 2210b User Manual: Assigning A Name To A Java Card; Setting Power-on Authentication

Protecttools.
Hide thumbs

Advertisement

Assigning a name to a Java Card

You must assign a name to a Java Card before it can be used for power-on authentication.
To assign a name to a Java Card:
1.
Select Start > All Programs > HP ProtectTools Security Manager.
2.
In the left pane, click Java Card Security, and then click Advanced.
3.
Insert the Java Card into the card reader.
NOTE:
allowing you to type a new name and PIN.
4.
In the right pane, under Display name, click Change.
5.
Type a name for the Java Card in the Name box.
6.
Type the current Java Card PIN in the PIN box.
7.
Click OK.

Setting power-on authentication

When enabled, power-on authentication requires you to use a Java Card to start the computer.
The process of enabling Java Card power-on authentication involves the following steps:
1.
Enable Java Card power-on authentication support in BIOS Configuration or Computer Setup. For
more information, see
on page
2.
Enable Java Card power-on authentication in Java Card Security.
3.
Create and enable the administrator Java Card.
40
Chapter 4 Java Card Security for HP ProtectTools
If you have not assigned a PIN to this card, the New Card dialog box opens,
"Enabling and disabling smart card power-on authentication support
47."
ENWW

Advertisement

Troubleshooting

Comments to this Manuals

Symbols: 0
Latest comments: