Enabling And Disabling System Configuration Options - HP Compaq NX6315 Getting Started Manual

Enabling and disabling system configuration options

NOTE
To enable or disable devices or security options:
1. Select Start > All Programs > HP ProtectTools Security Manager.
2. In the left pane, click BIOS Configuration.
3. Enter your Computer Setup administrator password at the BIOS administrator password prompt,
and then click OK.
4. In the left pane, click System Configuration, and then enable or disable a system configuration
option, or configure a system configuration option in the right pane:
●
Port Options
●
●
●
●
●
●
●
●
●
Boot Options
●
●
●
●
●
●
●
●
●
Device Configurations
●
●
●
●
36 Chapter 5 BIOS Configuration for HP ProtectTools
Some of the items listed below may not be supported by your computer.
Serial Port
Infrared Port
Parallel Port
SD Slot
USB Port
1394 Port
Cardbus Slot
ExpressCard slot
f9, f10, and f12 Delay (Sec)
MultiBoot
Express Boot Popup Delay (Sec)
CD-ROM Boot
Floppy Boot
Internal Network Adapter Boot
Internal Network Adapter Boot Mode (PXE or RPL)
Boot Order
NumLock at Boot
Swapping fn/Ctrl Keys
Multiple Pointing Devices
USB Legacy Support
ENWW