Restoring Factory Settings In Computer Setup - HP Compaq NX6315 Setup Manual

Computer setup
Hide thumbs Also See for Compaq NX6315:
Table of Contents

Advertisement

Restoring factory settings in Computer Setup

To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
Open Computer Setup by turning on or restarting the computer, and then pressing
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select File > Restore defaults, and then press enter.
3.
When the confirmation dialog box opens, press f10.
4.
To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
Changes and Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
NOTE:
factory settings.
ENWW
Your password settings and security settings are not changed when you restore the
Restoring factory settings in Computer Setup
f10
while the
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents