Setting Up The Computer - HP 500 Getting Started Manual

Setting up the computer

Computer setup involves the following tasks:
1. Inserting the battery into the computer.
2. Connecting the computer to external power
✎
3. Turning on the computer.
4. Setting up the software.
5. Creating recovery discs (recommended)
✎
Ä
CAUTION: Prevent file corruption and ensure correct driver installation
by observing the following practices during the hardware and software
setup procedures:
■
Do not unplug the computer from external power.
■
Do not shut down the computer or initiate standby or hibernation.
Getting Started
The battery begins to charge.
Refer to Appendix B, "Backup and recovery," for
instructions.
First-time setup
1–3