Testing Your Wireless Network Connection - Motorola SURFboard SVG7782 User Manual

Setting Up a Wireless Network Connection

Testing Your Wireless Network Connection

Perform the following test to verify that the SVG7782 and other wireless devices can connect to your
wireless network:
1. If connected, disconnect the Ethernet cable from your computer and the SVG7782.
2. Open a web browser on your computer.
3. Type a valid URL (for example, www.motorola.com/us) in the address bar, and then click or press
.
Enter
If the web page did not open, please contact your service provider for assistance.
SVG7782 Wireless Voice Cable Modem Gateway • User Guide
591429-001-a
This document is uncontrolled pending incorporation in a Motorola CMS
B
9