10-bit digital bi-directional video or video sync (4 pages)
Summary of Contents for Comnet FVT40SFP Series
Page 1
INSTALLATION AND OPERATION MANUAL FVT/FVR40SFP 4-CHANNEL DIGITALLY ENCODED VIDEO USING SMALL FORM-FACTOR PLUGGABLE (SFP) OPTICAL DEVICES The FVT/FVR40SFP series optical video link provides transmission of four 10-bit medium-haul quality digitally encoded video channels through a selectable small form factor pluggable module (SFP). See instructions included with SFP for installation of selected module.
Page 2
INSTALLATION AND OPERATION MANUAL FVT/FVR40SFP FIGURE 1 – FVT/FVR40SFP TRANSMITTER AND RECEIVER OPTICAL FIBER DETERMINED BY SELECTION OF SFP MODULE BLACK BLACK WITH WHITE STRIPE FIGURE 2 – FVT40SFP TRANSMITTER FIGURE 3 – FVR40SFP RECEIVER FRONT PANEL REAR PANEL FRONT PANEL REAR PANEL NOTE: Remove Electrical Connector for Rack Mount Units INS_FVT/FVR40SFP_REV–...
Page 3
INSTALLATION AND OPERATION MANUAL FVT/FVR40SFP FIGURE 4 – LED INDICATORS LINK VIDEO POWER GREEN Communication link has been An active video signal is present Unit powered up established over optical fi ber on the BNC connector. Communication link has not No Video Signal –...
Need help?
Do you have a question about the FVT40SFP Series and is the answer not in the manual?
Questions and answers