Frigidaire FPBM307NTFA Use & Care Manual page 25

Disconnect the power cord or leave the door open to deactivate the oven
during cleaning. Disconnect the power cord before replacing filters and lights.
Cleaning the exhaust filters
The oven ventilation exhaust filters should be removed and
cleaned often; generally at least once every month.
Vent exhaust filter part number
To order parts call 800-599-7569
To avoid risk of personal injury or property damage, do
not operate oven hood without filters properly in place.
Surface lights
grease filter
buckle
1. To remove the exhaust ventilation filters, slide the filter to
the rear. Then pull filter downward and push to the other
side. The filter will drop out.
2. Soak the ventilation filters in hot water using a mild
detergent. Rinse well and shake to dry or wash in
Do not use ammonia. The aluminum
on the filter will corrode and darken.
3. To reinstall the exhaust ventilation filter, slide it into the
side slot, then push up and toward oven to lock.
Reinstall the 2nd filter using the same procedure.
Surface light replacement
5304478913
1. Unplug the microwave oven or turn off power at the main
2. Remove the
Front
Rear
3. Remove the LED light mounting screw.
4. Unplug the LED light from the harness, replace with
5. Re-install LED light and mounting screw.
6. Re-install LED light cover and mounting screw.
7. P lug the microwave back into the power supply or
CLEANING AND CARE
To avoid risk of personal injury or property damage, wear
gloves when replacing the light bulbs.
circuit breaker.
cover mounting screws at both
LED light
light positions under the microwave.
LED light of part# 5304499540. To order parts
800 - 599 - 7569. Then reconnect the harness.
When re-installing mounting screw be careful
not to damage the LED light.
turn the power back on at the main circuit breaker.
call
25