Adjustable Throttle And Brake Pedal; Engine Coolant Heater; To Use The Engine Coolant Heater - Chevrolet 2009 Suburban Owner's Manual

Adjustable Throttle and Brake Pedal

On vehicles with this feature, you can change the
position of the throttle and brake pedals.
No adjustment to the pedals can be made when the
vehicle is in R (Reverse) or while using the cruise
control.
Press the arrow at the bottom of the switch to move the
pedals closer to your body. Press the arrow at the top of
the switch to move the pedals away from your body.
Before you start driving, fully press the brake pedal to
confirm the adjustment is right for you. While driving,
make only small adjustments.
2-30
The switch used to adjust
the pedals is located on
the instrument panel below
the climate control
system.
The vehicle may have a memory function which lets
pedal settings be saved and recalled. See Memory Seat,
Mirrors, and Pedals on page 1-8 for more information.

Engine Coolant Heater

The engine coolant heater can provide easier starting
and better fuel economy during engine warm-up in cold
weather conditions at or below 0°F (− 18°C). Vehicles
with an engine heater should be plugged in at least
four hours before starting. An internal thermostat in
the plug-end of the cord may exist which will prevent
engine coolant heater operation at temperatures
above 0°F (−18°C).

To Use the Engine Coolant Heater

1. Turn off the engine.
2. Open the hood and unwrap the electrical cord.
The cord is located on the driver's side of the
engine compartment, near the power steering fluid
reservoir.
3. Plug the cord into a normal, grounded 110-volt AC
outlet.