Do you have a question about the CZ161WT and is the answer not in the manual?
Questions and answers
Gary
May 7, 2025
I have to clean the fan - how do i take off the grill??
1 comments:
Mr. Anderson
May 19, 2025
To remove the grill from the Comfort Zone CZ161WT fan for cleaning:
1. Disconnect the power cord from the plug. 2. Remove two screws from the base of the fan and save them. 3. Detach the front grille by unsnapping it from the rear grille. Make sure all 8 clips are released. 4. Do not operate the fan without the grille in place after cleaning.
Use a clean damp cloth to wipe the grille. Do not immerse the fan or use harsh chemicals.
Page 1
Owner’s Manual Please Read & Save These Instructions www.comfortzoneproducts.com 16" Table Fan Features: • Wide Area Oscillation • Push Button ON/OFF Switches and 3 Speed Settings • High Performance Fan Blade • Adjustable Tilt • Safety Grilles • 120V A.C. / 60Hz. CZ161...
Page 2
For all other • Avoid the use of extension cords due to risk of fire. If an repairs contact Comfort Zone ® Customer Service by telephone or extension cord must be used, the cord must be minimum mail for information and assistance.
Page 3
www.comfortzoneproducts.com Usage: Step 3 Step 4 Fan Operation: Always operate the fan in the upright position Alignment Pins following all instructions and recommendations listed in this manual. Fan Location: Place the fan in the area of the room that will provide proper fan cooling.
Page 4
www.comfortzoneproducts.com Care and Maintenance Limited Warranty Cleaning: CAUTION‑Before cleaning the fan be sure to This unit is guaranteed to the original retail purchaser against disconnect power cord from the plug. Clean the grille surface defects in quality or workmanship for a period of one year with a clean damp cloth.
Need help?
Do you have a question about the CZ161WT and is the answer not in the manual?
Questions and answers
I have to clean the fan - how do i take off the grill??
To remove the grill from the Comfort Zone CZ161WT fan for cleaning:
1. Disconnect the power cord from the plug.
2. Remove two screws from the base of the fan and save them.
3. Detach the front grille by unsnapping it from the rear grille. Make sure all 8 clips are released.
4. Do not operate the fan without the grille in place after cleaning.
Use a clean damp cloth to wipe the grille. Do not immerse the fan or use harsh chemicals.
This answer is automatically generated