Acer KG241 User Manual page 22

7. Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the
brightness without changing lighter shades.
-----------------------------------------------------------------------------------------------------------
Note: If the image is very bright or has few shadow areas, adjusting this setting
may not result in any noticeable changes to the image.
8. Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light is
shown -- 80%, 70%, 60%, or 50%.
--------------------------------------------------------------------------------------------------------------------------
Note: Higher values allow more blue light through. For the best protection select a lower
value.
9. ACM: Turn ACM on or off. The default is off.
10. Super Sharpness:Turn the sharpness On or Off. Sharpness technology can simulate
high-resolution images by boosting the pixel density of the original source to make
images sharper and clearer.
Color
Mode - Stamdard
Picture
Gamma
Color
Color Temp.
Audio R Gain
Gaming
G Gain
OSD B Gain
System
R Bias
Information
G Bias
Save Setting to... B Bias
Mode - User
Picture sRGB Mode
Color
6-axis Hue
Audio
6-axis Saturate
Gaming
OSD
System
Information
Save setting to...
Save Settint to...
Move Enter
1. Press the MENU key to open the OSD.
2. Using the ▲/▼ keys, select Color from the OSD. Then navigate to the picture element
you wish to adjust.
3. Use the ◄/► keys to select the setting.
4. Gamma mode allows you to adjust the luminance tone.The default value is 2.2 (standard
value for Windows).
5. Color temperature: Default is warm. You can choose Cool, Normal, Warm, Bluelight or
User.
2.2
Blue Light
Off
Quick Start Mode
50
50
50
50
50
50
11