KitchenAid KEK1025 Owner's Manual page 5

USING THE PRECISION KETTLE
PREPARING THE PRECISION KETTLE FOR USE
Before first use
Before using your Precision Kettle for the first time, wash the kettle and all accessories,
including the lid, in warm, soapy water, then rinse with clean water and dry. Fill the
Precision Kettle with water to the "Max" fill line (see example below) and run one cycle at
the maximum temperature. To avoid damage, do not fully immerse the Precision Kettle
in water, and do not use abrasive cleaners or scouring pads.
NOTE: The entire Precision Kettle is hand wash only. To avoid damage, do not wash any
part of the Precision Kettle, its accessories, or the base with power cord in a dishwasher.
Fill the Precision Kettle with water to the
"Max" fill line inside the kettle.
FOR DETAILED INFORMATION ON USING THE PRECISION KETTLE
Visit kitchenaid.com/quickstart for additional instructions with videos and tips on how
to use your Precision Kettle.
Since 1919
IMPORTANT: Be sure that the vent
holes at the top of the kettle are
clean and free of obstructions, or
the Precision Kettle may overflow.
Place the base with power cord on
1
a flat, sturdy surface and plug it into
a 3 prong grounded outlet.
USING THE PRECISION KETTLE | 5