GPS-911(M) Hardware Quick Installation Guide 1. Precaution before Installation Check if all the parts are included. Prepare a SIM card for GSM communication. Use some other mobile phone to confirm that the PIN code has not been set, and that it can dial out and receive telephone calls without problem.
3. Installation Step1. Fully charge the battery for at least 8 hours before your first use. Step2. Install SIM Card: (1) Remove the back cover of the device as illustrated. (2) Push the holder top (with an ellipse hole) leftward to loose it. (3) Pull the holder top up.
4. Operating Instructions (1) Power On/Off Power On: Step1. When it is off, press the power button for 2 seconds to switch on the power. Step3. Some 15 seconds later, GPRS LED starts to flash swiftly for 10 times. Power Off: When it is on, press the power button for 2 seconds to switch off the power;...
Page 5
(2) SOS Emergency Help Function When SOS button is pressed, SOS LED will flash; GPS-911 will send a SMS message for emergency help. The ones receive the message can activate the voice monitoring function, and offer assistance in time. The phone numbers list can be set by the users. (3) Conversation Function Call In: One can make phone call to GPS-911 by simply dialing the SIM card number.
5. Battery Charging Method 1: Connect the USB cable Method 2: Connect car charger to the car cigarette lighter directly. Method 3: Connect the USB cable 6. Description of the LED Indicators Charge (RED LED) Flash Constant Battery charging Glow Constant not charging;...
Page 7
Track GPS Location by SMS You can get the latitude & longitude data by sending “111#Password” SMS (short message) command Code to the GPS Tracker. Input the received latitude & longitude data to Google Earth then you can find the position fix in the map. Please find below the example. Step1.
Page 8
SMS Track Software Quick Installation Guide 1. Requirements (1) A PDA Phone with Windows CE or Mobile 5.0 OS. (2) A navigation map installed in the PDA Phone. (3) A GSM SIM card installed in the GPS Tracker. 2. Installation Step1.
Page 9
Step4. The following screen will prompt. The left column is for the name of the Step5. If your set up of the Virtual COM Port is successful, the system will ask you to reboot your PDA Phone. Please click “Yes” to reboot the device, and complete the installation of Virtual COM Port.
Page 10
3. Get GPS Position Data Step1. Go to Tools the name you want to track, and click OK to close this screen. Then go to Track screen. like to track) Step2. Then go to “Track” screen. Send the command to the tracker; you will receive the position data from the tracker in a few seconds.
Page 11
Step3. Then, open the mapping software. The image of appear as a following figure. This figure is to set the source of GPS data. Set the GPS Port is to be the same as the Virtual COM Port. We set SMS Track in COM8;...
Page 12
For software update or technique support, please contact your local distributor or contact: http://www.gopasstech.com E-mail: support@gopasstech.com...
Need help?
Do you have a question about the GPS-911M and is the answer not in the manual?
Questions and answers