Gisteq RG-110 Quick Start Manual

GiSTEQ
TM

Driver Installation

LED Indicator

LED OFF
LED ON
LED FLASHING
© 2009 GiSTEQ Corp. All Rights Reserved.

Quick Start Guide

1. Plug the device into the computer to start
installing the driver.
2. The Found New Hardware window will appear
as shown on left.
3. Select "Locate and install driver software
(recommended)".
4. In the next window, you will be asked to put in
the driver CD. Put the CD into the computer
and click Next.
5. When driver installation is finished, you will
see a message saying "Driver have been
successfully installed" along with the COM
port assigned to the device.
* The default baud rate is 4800 bps.
USB GPS receiver is off
USB GPS receiver is on and searching for signal
USB GPS receiver has received a fixed GPS signal