Table of Contents
Advertisement
Data encryption
Note:
Select different Security Options, the configurations are different; you can select the
appropriate security option and configure the exact key as your need.
4.4.2 Advanced
Items
Information
Beacon Interval
Beacon frequency spacing.
Delay transmission indicator map (DTIM) is enabled for power management of
DTIM Period
the client. If any client power management is enabled, the DTIM should be
retained for 1 (the default). Support this parameter range from 1 to 255.
Preamble Mode
Select the options from the drop list. (Long / Short).
Set Defaults
Setting the default value of General.
Apply
Apply the above changes.
There are 4 types supported: Disabled, WEP, TKIP and AES. The
available encryption selection will differ from the authentication type you
have chosen, the result is shown below:
Authentication
Open System
Shared Key
WPA-PSK,
WPA2-PSK
Wireless 11n USB Adapter
Available Encryption Selection
Disabled, WEP
WEP
TKIP, AES
- 84 -
Advertisement
Table of Contents
