Power Management Setup - Gigabyte GA-946GM-DS2 User Manual

Parallel Port Mode
SPP
EPP
ECP
ECP+EPP
2-4

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
ACPI Suspend Type
Soft-Off by PWR-BTTN
PME Event Wake Up
Power On by Ring
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
Power On By Mouse
Power On By Keyboard
x KB Power ON Password
AC Back Function
: Move Enter: Select
F5: Previous Values
ACPI Suspend Type
S1(POS)
S3(STR)
Soft-Off by PWR-BTTN
Instant-Off
Delay 4 Sec.
PME Event Wake Up
This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.
Disabled
Enabled
Power On by Ring
Disabled
Enabled
Resume by Alarm
You can enable this item and key in a date/time to power on system.
Disabled
Enabled
Using the onboard LPT port as Standard Parallel Port. (Default value)
Using the onboard LPT port as Enhanced Parallel Port.
Using the onboard LPT port as Extended Capabilities Port.
Using the onboard LPT port as ECP & EPP mode.
Power Management Setup
[S1(POS)]
[Instant-Off]
[Enabled]
[Enabled]
[Disabled]
Everyday
0 : 0 : 0
[Disabled]
[Disabled]
Enter
[Soft-Off]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Set ACPI suspend type to S1/POS (Power On Suspend). (Default
value)
Set ACPI suspend type to S3/STR (Suspend To RAM).
Press power button to power off the system instantly. (Default value)
Press power button 4 sec. to power off. Enter suspend if button is
pressed less than 4 sec.
Disable this function.
Enable PME as wake up event. (Default value)
Disable Power on by Ring function.
Enable Power on by Ring function. (Default value)
Disable this function. (Default value)
Enable alarm function to POWER ON system.
- 39 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup