Gigabyte GA-946GM-DS2 User Manual page 35

CPU Hyper-Threading
Enabled
Disabled
Limit CPUID Max. to 3
Enabled
Disabled
No-Execute Memory Protect
Enabled
Disabled
CPU Enhanced Halt (C1E)
Enabled
Disabled
CPU Thermal Monitor 2 (TM2)
Enabled
Disabled
CPU EIST Function
Enabled
Disabled
Virtualization Technology
Enabled
Disabled
Init Display First
This feature allows you to select the first initiation of the monitor display from which card when you
install a PCI card and a PCI Express VGA card on the motherboard.
PCI
Onboard
PEG
Onboard VGA
This item allows the user to decide when to activate the onboard VGA function.
Enable If No Ext PEG Activate the onboard VGA first only when no PCI Express VGA card is
installed. (Default value)
Always Enable
Always activate the onboard VGA first, whether or not a PCI Express card is installed. If you wish
to set up a dual view configuration, set this item to Always Enable.
On-Chip Frame Buffer Size
1MB
8MB
(Note) This item will show up when you install a processor that supports this function.
(Note)
Enable CPU Hyper Threading Feature. Please note that this feature is only
working for operating system with multi processors mode supported. (Default
value)
Disable CPU Hyper Threading.
(Note)
Limit CPUID Maximum value to 3 when use older OS like NT4.
Disable CPUID Limit for windows XP. (Default value)
(Note)
Enable No-Execute Memory Protect function. (Default value)
Disable No-Execute Memory Protect function.
(Note)
Enable CPU Enhanced Halt (C1E) function. (Default value)
Disable CPU Enhanced Halt (C1E) function.
(Note)
Enable CPU Thermal Monitor 2 (TM2) function. (Default value)
Disable CPU Thermal Monitor 2 (TM2) function.
(Note)
Enable CPU EIST function. (Default value)
Disable EIST function.
(Note)
Enable Virtualization Technology. (Default value)
Disable this function.
Set Init Display First to PCI VGA card. (Default value)
Set Init Display First to onboard VGA function.
Set Init Display First to PCI Express VGA card.
Set on-chip frame buffer size to 1 MB.
Set on-chip frame buffer size to 8 MB. (Default value)
- 35 - BIOS Setup