Electrolux EI24ID81SS0A Use And Care Manual page 8

8 Operating Instructions
Opening the door while the
appliance operates
If you open the door while a cycle is running or
delay is counting down, the appliance stops.
The LEDs of selected cycle and options are
illuminated. The status window displays the
remaining cycle time or delay time and then
displays 'Press Start'.
To resume, press START pad and close the
dishwasher door immediately. The status window
displays 'Close door' after the START pad is
pressed. A tone will sound indicating that the
dishwasher continues from the point of interruption
after the door closing.
If the dishwasher door is kept open for too long,
or the door is closed without pressing START
pad, the running cycle or delay countdown may be
cancelled.
S t a t u s w i n d o w
That STATUS window displays codes typically seen
during normal operation or programming of the
dishwasher. The STATUS window indicates the
following activity:
1HR-24HR - Indicates
number of delay start
hours for selected
cycle.
PRESS START -Scroll
across the status
window indicating the
START pad needs to be
pressed.
CLOSE DOOR - Scroll
across the status
window once the
program has been
entered and the START
pad is pressed.
Child Lock is
activated.
MIN - The cycle duration
or the remaining time.
L1 - L4 - Level of Rinse
Aid Dosage.
LOW RINSE - Refi ll
Rinse Aid
CLEAN - End of Cycle.
D i s p l a y o n f l o o r
The display on fl oor indicates the following
activities:
The cycle duration remaining
time.
Remaining time of Delay
start
End of cycle
Error codes