SETUP & INSTRUCTIONS PLUG & PLAY The headset is connected to PC/console/ other device with 1 cable that has 3 jointers PLAYING GAMES In order to play games, please plug the 3 jointers all into your PC/console/other device WATCHING MOVIES In order to watch movies, please do not plug the red USB connector ( the red USB connector is used as a mouse pointer - head tracking )
Page 4
Right click on the desktop and select Screen resolution Select Extend these displays in Multiple Displays and click Apply...
Page 5
Click Keep changes Select ANTVR AK1 in display and Portrait in orientation...
Page 6
Select 1920x1080 in resolution and click Apply Click Keep changes If you check the resolution, ANTVR AK1 may display 1920x1080 portrait 1920x1080 landscape ( Flipped ), which are both correct You don’t need to change the settings next time...
Page 7
If the game cannot start in the headset ( but starts on the PC screen ), you can unplug other monitors or make ANTVR AK1 your Main display PLEASE NOTE If the PC is not set as above, the display orientation may be incorrect,...
Page 8
*HSBS = Half Side By Side MODE SIDE-BY-SIDE Shows half of the desktop for each eye MODE 3D HALF SIDE-BY-SIDE Compresses a half vertically MODE Same image for both eyes This mode is specifically for VR games developed for the ANTVR headset.
Page 9
This mode is specifically for *HSBS 3D images, which is the worldwide standard 3D format and is used in 3D games and 3D movies. 1. For 3D games, switch on 3D option and play it directly with the ANTVR headset.
Page 10
This mode is for playing 2D games and watching 2D movies. It duplicates compressed images for both eyes, so text may not be clear in this case. If you want to read text clearly: While using your PC, you can press to switch on the desktop magnifier.
Page 11
Enjoy your ANTVR KIT! For more details, visit www.antvr.eu...
• To ensure the accuracy and the comprehensiveness of health & safety information, please check the updated information at www.antvr.eu WARNING: All users should read the following information before using the product in order to reduce risk of injury, discomfort and property damage.
Page 13
Discomfort Remove the headset immediately when you experience dizziness, loss of awareness, eye strain, muscle twitch, vision blur, loss of direction, loss of balance, sweating, increased salivation, headache, nausea, thirst, fatigue, or any symptoms relevant to motion sickness. • Before complete recovery from discomfort, do not drive, operate machinery or engage in any other activity where careful attention is needed.
Need help?
Do you have a question about the ALL-IN-ONE UNIVERSAL VIRTUAL REALITY KIT and is the answer not in the manual?
Questions and answers