1. Introduction Each switcher in the Elector Range is compatible to v1.3 HDMI specifications, supporting up to 16 bit Deep Colour together with High Definition audio. This CEC command function switcher allows the latest v1.3 HDMI equipment to Auto-Switch on source power up. 2.
8 by 1 HDMI v1.3 Switcher • Remote Control (CR-63 with battery) • 5V DC Power Supply Adaptor • Operation Manual. 4. Operation Controls and Functions 4.1 Front Panel EL-C81C 8x1 HDMI v1.3 Switcher xvYCC HD Audio Deep Color HDMI IN 1 INPUT POWER ON/Bypass 1.
1. POWER indicator: When power is connected to the device, the device automatically turns on and the power LED will turn red. Note: To turn ON or switch the device to standby mode, please press the “POWER” button on the remote control unit.
4.3 Remote Control ② POWER ① ③ INPUT CR-63 1. Power: Press the button to turn on the unit-or set the device to standby mode. 2. CEC: Press the button to turn on /Bypass the CEC function. When the LED illuminate it means CEC is ON and both input source and output display must support CEC function in order to perform CEC rightly.
"C" + "0" CEC OFF "P" + "1" POWER ON "P" + "0" POWER OFF “S” REPORT STATE RS-232 transmission format: • The command is combined with a characters and digits. • This combination command code has to be separated by ASCII character SPACE.
7. Specifications HDMI Input Port 8 x HDMI female ports + 1 x RS-232 HDCP Version V1.1 HDMI Output Port 1 x HDMI female port HDMI Specification v1.3 Colour Space YCbCr 4:2:2 16/20/24 bits Deep Colour RGB / YCbCr 4:4:4 24/30/36 bits Human body model: ±...
Need help?
Do you have a question about the EL-C81C and is the answer not in the manual?
Questions and answers