Deactivating The Active Framechannel Account - Motorola LS1000W User Manual

4.
You can press the EXIT button to stop the slideshow,
and display photos in full screen single photo mode.
5.
To quit, press the EXIT button again.
NOTE
•
To copy a photo, select the photo in thumbnail mode
and press the MENU button on the remote control.
When the Copy One option appears, press the
button to select YES, use the UP/VOL＋ or
DOWN/VOL－ button to select the destination (Internal
Memory, USB or Memory Card), and then press the
button to proceed.
•
If the photos displayed are not the photos of your own,
check your FrameChannel
Account Cfg. You might have input the wrong account
name and 4-digit PIN code. Please verify your account
name/PIN code and try again.
Using the menus
™
account configuration in
3.5.3.3.2 Deactivating the active
FrameChannel account
You can deactivate the currently active FrameChannel
account and set up another FrameChannel account to work
with your LS1000W.
1.
Go to integrated.framechannel.com, and log into your
FrameChannel account.
2.
Go to My Account.
35