Electrolux E24ID75SPS Use And Care Manual page 8

8
Opening the door while the
appliance operates
If you open the door while a cycle is running or
delay is counting down, the appliance stops.
The LEDs of selected cycle and options are
illuminated. The status window displays the
remaining cycle time or delay time and then
displays 'Press Start'.
To resume, press START pad and close the
dishwasher door immediately. The status window
displays 'Close' after the START pad is pressed.
A tone will sound indicating that the dishwasher
continues from the point of interruption after the
door closing.
If the dishwasher door is kept open for too long,
or the door is closed without pressing START
pad, the running cycle or delay countdown may be
cancelled.
S t a t u s w i n d o w
That STATUS window display codes typically seen
during the programming of the dishwasher. The
STATUS window will not illuminate when the unit
is running. The STATUS window indicates the
following activities:
1HR-24HR - Indicates
number of delay start
hours for selected
cycle.
PRESS START -Scroll
across the status
window indicating the
START pad needs to be
pressed.
CLOSE - Scroll across
the status window once
the program has been
entered and the START
pad is pressed.
Child Lock is
activated.
MIN - The cycle duration
or the remaining time.
L1 - L4 - Level of Rinse
Aid Dosage.
LOW RINSE - Refi ll
Rinse Aid
CLEAN - End of Cycle.
Green and Blue lights on the
Floor
This feature is available on EI24ID81S model only
When the GREEN LIGHT illuminates on the fl oor
this indicates that the wash cycle is complete.
When the BLUE LIGHT illuminates on the fl oor this
indicates that the wash cycle is operating.
D i s p l a y o n f l o o r
This feature is available on E24ID75SPS model
only
The display on fl oor indicates the following
activities:
The cycle duration remaining
time.
Remaining time of Delay
start
End of cycle
Error codes