Preparation
Identification of parts
NOTE:
All the illustrations in the manual are for explanation purpose only. Your machine may be slightly different.
The actual shape shall prevail. The unit can be controlled by the unit control panel alone or with the remote
controller. This manual does not include Remote Controller Operations, see the <<Remote Controller
Instruction>> packed with the unit for details.
Design Notice
In order to ensure the optimal performance of our products, the design specifications of the unit are
subject to change without prior notice.
Positioning the unit
40cm or more
20cm or more
40cm or more
control panel
air intake grille
air filter (behind
the grille)
water bucket
front
control panel
air intake grille
air filter (behind
the grille)
water bucket
front
20cm or more
20cm or more
air outlet grille
power cord band
drain hose outlet
power cord
power plug
air outlet grille
power cord band
drain hose outlet
power cord
power plug
This unit is designed to operate with a working
environment between 5 C/41 F and 32 C/90 F,
and between 30%(RH) and 80%(RH)
Casters(Installed at four points on the
bottom of unit)
Do not force casters to move over carpet, nor
•
move the unit with water in the bucket.
(The unit may tip over and spill water.)
Note: Casters is optional, some models
without.
rear
rear
Page 11