DeWalt DCE100M1 Instruction Manual page 16

TROUBLESHOOTING
PROBLEM SOLUTION
Unit will not start • Check battery installation.
• Check battery charging
requirements.
Battery won't charge • Insert battery into charger until red
charging light illuminates. Charge
up to 8 hours if battery is totally
drained.
• Plug charger into a working outlet.
Refer to Important Charging
Notes for more details.
• Check current at receptacle by
plugging an appliance into it.
• Check to see if receptacle is
connected to a light switch which
turns power off when you turn out
the lights.
• Move charger and appliance to
a surrounding air temperature of
above 40 °F (4.5 °C) or below
105 °F (40.5 °C).
14