Table of Contents
Advertisement
Troubleshooting
Before sending your LCD monitor for servicing, please check the troubleshooting list
below to see if you can self-diagnose the problem.
VGA Mode
Problem
No picture visible
Unstable picture
Abnormal picture
14
LED status
Blue
Off
Amber
Blue
Image is missing,
off-center, too
large or too small
on the screen.
Remedy
Using the OSD menu, adjust brightness
and contrast to maximum or reset to their
default settings.
Check the power switch.
Check if the power cord is properly
connected to the monitor.
Check if the video signal cable is properly
connected at the back of monitor.
Check if the computer system is switched
on and in power saving/standby mode.
Check if the specification of graphics
adapter and monitor is in compliance
which may be causing the input signal
frequency mismatch.
Using the OSD menu, adjust focus, clock,
H-position and V-position with non-
standard signals.
Check the display setting on your system.
In case of a missing image, please select
another resolution or vertical refresh rate.
Wait for a few seconds after adjusting
the size of the image before changing
or disconnecting the signal cable or
switching off the monitor.
Advertisement
Table of Contents
