Sharp LL-T2015 Operation Manual page 22

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Adjusting the screen display
GAIN CONTROL Menu
GAIN CONTROL
MANUAL
AUTO
BLACK LEVEL
50
-
CONTRAST
50
-
INPUT-1
ANALOG
1600 x 1200
V:60Hz
H:75.0kHz
MANUAL: Individual menu options are manually
adjusted.
AUTO:
Every menu option is automatically
adjusted using the Auto Gain Control*
function.
Notes:
- Press the
button to select [AUTO].
- To choose a menu option:
- To go to the next menu: MENU button
* Auto Gain Control function
- The Auto Gain Control adjusts contrast and
black level based on the brightest and darkest
colors of the image displayed. If you are not
using the Adjustment Pattern it is necessary to
have black area and white area of at least 5 mm
x 5 mm on the screen. Adjustment may not be
possible without those areas.
- If the signal coming from the computer is
Composite Sync or Sync on Green, automatic
adjustment cannot be performed. Please
perform manual adjustment instead.
- If [OUT OF ADJUST] is displayed, perform
manual adjustment.
BLACK LEVEL
Total screen brightness can be adjusted while
watching the color pattern. (
Color pattern
CONTRAST
While watching the color pattern, adjustments can
be made so that all gradations appear.
(
buttons)
+
+
/ MODE button
buttons)
(With analog connection)
COLOR CONTROL Menu
COLOR CONTROL
WHITE BALANCE
GAMMA
0
-
INPUT-1
ANALOG
1600 x 1200
V:60Hz
H:75.0kHz
Notes:
- To choose a menu option:
- To go to the next menu: MENU button
WHITE BALANCE
After selecting [WHITE BALANCE], press the
button and display the adjustment menu.
W H I T E B A L A N C E
C O O L
S T D
W A R M
R - C O N T R A S T
G - C O N T R A S T
B - C O N T R A S T
O K . . . < M E N U >
Notes:
- On settings other than [STD] not all gradations
can be displayed. To display all gradations, set
to [STD].
- If [DISPLAY MODE] is set to [sRGB] or [VIVID],
no other setting than [STD] can be selected.
- Use the
buttons to select [COOL], [·], [STD],
[·], [WARM] or [USER].
- Selecting [USER] will display the setting values
for [R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST], in order to make fine
adjustments.
- Use the
/ MODE button to select
[R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST].
- When adjustment completes: MENU button
22
+
/ MODE button
U S E R

Advertisement

Table of Contents
loading

Table of Contents