Before Setting Surface Controls - Frigidaire FPGC3077RS Use & Care Manual

PLACEMENT OF BURNER CAPS
Place a burner cap on each burner head, matching the
cap size to the head size. The cap for each burner has an
inner locating ring which centers the cap correctly on the
burner head. Be sure that all the burner caps and burner
heads are correctly placed BEFORE using your appliance.
Make sure each burner cap is properly aligned and level.
Turn the burner on to determine if it will light. If the
burner does not light, contact a Service Center. Do not
service the sealed burner yourself.
ATTENTION: Do not slide the burner caps on the
cooktop, doing so can damage the surface.
IMPORTANT
For Proper Ignition: Burner Ring
Alignment Tab Must Align with Burner
Base Alignment Tab Slot
Burner Ring
Alignment Tab

BEFORE SETTING SURFACE CONTROLS

Burner Base
Alignment Tab Slot
Burner Cap
Burner Head
Correct Burner Cap
Placement
Burner Cap
Burner Cap Lip
Incorrect Burner Cap
Placement
Burner Ring
Burner Base
Simmer Head
9