Master Section - LD VIBZ 24DC User Manual

81
83
84
85
89
87
88
90
91
92
95
93 95
94 97
108
109
105
104 106
14

MASTER SECTION

81
USB-socket type A to connect a desk lamp. Make sure that the specifications of the
82
socket and the desk lamp match (5 V DC, a maximum of 500 mA).
82
6.3 mm jack socket for connecting a headphone. This connection allows you to listen
to various signals:
A. Switch N 100 (CTRL ROOM SOURCE MAIN/GR) is not pressed down and no PFL
switch is depressed: Sum signal MAIN MIX
B. Switch N 100 is pressed down and no PFL switch is pressed down: Group signal
GROUP GR 1 / 2 or GR 3/4 (observe switch N 101 GR 1/2 / GR 3/4).
C. One or more of the PFL switches of the input channels is pressed down: Corre-
sponding channel/channels is/are picked up before the channel level (Pre Fader
86
Listening).
83
Graphical 7-band equalizer for the MAIN MIX sum signal.
84
Switch for switching the sum equalizer (N 83) on and off. In the down position, the
equalizer is enabled, and in the up position, it is disabled.
98
85
99
As soon as the phantom power supply of the mixer is switched on, the LED display
100
+48V lights up (switch N 3 on the rear panel).
101
86
The Power LED lights up as soon as the mixer is turned on and correctly connected
103 to the mains.
87
102
2-digit LED display for displaying the effect preset number (00 - 99).
88
Rotary pressure-encoder to select and activate the effect presets. Select the desired
111
preset by turning the encoder and activate it by pressing on the encoder.
89
List of available digital effects.
90
Once the red Peak LED lights up, the input of the internal effects device is operating at
the distortion limit. Adjust the Effect Send level controller DFX SENDS AUX 4 (N 94) so
107
that the peak LED does not light up when signal peaks occur.
91
110
In order to mute the internal effects device, briefly press the DFX Mute button once,
and again to turn mute off. If the effects device is muted, the peak LED N 90 lights up
continuously.
POWER LAMP
HEADPHONE OUTPUT
STEREO GRAPHIC EQ
EQ ON/OFF
DISPLAY LED +48V
POWER LED
DISPLAY DFX PRESET
DFX PRESETS (PUSH)
DFX PRESETS LIST
DFX PEAK LED
DFX MUTE