Denver BTS-22 Instruction Manual

DENVER BTS-22 - Bluetooth Speaker

Power:

 Works on internal rechargeable lithium battery. Please charge your speaker fully
before first use. To charge the battery:
Using a microUSB cable (included), insert the jack into the "Charging" hole and then
plug the USB connecter into the USB port on a computer for charging.
 A red light will indicate the charging situation. When battery is full, the red light will
turn off automatically.

Bluetooth Speaker Operation:

 Turn on the unit by pushing the switch to
blinking to indicate the speaker is in paring mode and searching for your Bluetooth
mobile device.
 Open the Bluetooth function on your device and search the speaker named "BTS-
22". After selecting this speaker, your device will pair without a password. (If
required, enter the password "0000" to finalize the paring).The blue light will begin to
flashing slowly after pair is complete.
 Start playing music on your device. Keep your device within 33 feet (10 meter) of
your speaker.
 Adjust the volume of your device to a comfortable level.
 Turn off the unit when not in used.
Caution:
 This is not a toy. Please keep away from small children.
 Please keep away from water / heat.
Low power may cause poor connection even no working of Bluetooth.

Instruction Manual
(Read before proceeding)
position. A blue light aside will start