LG F1247TD Owner's Manual

1 Remove Packaging 4 Electrical connection
1. Do not use an extension cord or double adapter.
• The appliance is fitted with transit bolts to prevent internal
2. Have damaged supply cords replaced by the manufacturer or its service agents or a similarly qualified person to prevent
damage during transport. Be careful, heavy load!
danger.
• Packing and all transit bolts must be removed before using 3. Always unplug the machine and turn off the water supply after use.
the washing machine. 4. Connect the machine to an earthed socket in accordance with current wiring regulations.
5. The appliance must be positioned so that the plug is easily accessible.
• When unpacking the base, be sure to remove the additional
• Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by inexperienced
packing support in the middle of the base packing.
persons may cause injury or serious malfunctioning. Contact your local service centre.
• Do not install your washing machine in rooms where temperature below freezing may occur. Frozen hoses may burst under
i Store original packing for future move. pressure. The electronic control unit may become unreliable at temperatures below freezing point.
Dispose of packing material according to local regulations. • If the appliance is delivered in the winter months and temperatures are below freezing: Leave the washing machine standing
at room temperature for a few hours before putting it into operation.
2 Transit bolts Green and BS Plug Safety Details (For U.K. User)
Yellow (Earth)
E
Brown(Live)
Fuse
L
Schraubenschlüssel Blue(Neutral) This appliance must be earthed As the colours of the wires in the mains lead
N
Cord of this apparatus may not correspond with the coloured markings identifying
1 2
To prevent internal dama- grip
Remove the 4 bolts
the terminals in your plug, proceed as follows: The green and yellow wire must
ge during transport, the
along with the rubber
be connected to the terminal in the plug marked E or by the earth symbol
special 4 bolts are locked.
bungs by slightly twis-
coloured green or green and yellow. The wire coloured blue must be connected to the terminal marked with the letter
If they are not removed, it ting the bung.
N or coloured black. The wire coloured brown must be connected to the terminal marked with the letter L or coloured
may cause heavy vibrati-
on, noise and machine to red. If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
malfunction.
Connecting water supply hose
5
3 4
Unscrew the 4 bolts Close the holes with
3. Die 4 Schrauben lösen und die
using the spanner the caps supplied.
The hose supplied with the machine must be used. Old hoses may not be reused
Gummipfropfen etwas drehen, um sie
supplied.
zusammen mit den Schrauben abzunehmen.
Die 4 Schrauben und den Schraubenschlüssel
für späteren Gebrauch aufbewahren.
• Die Transportsicherungsschrauben müssen vor
Keep the 4 bolts and the spanner for the future use. Refit transit bolts before transporting the appliance.
jedem Transport des Geräts wieder angebracht
werden.
3 Requirements for installation site
4. Die Schraubenbohrungen mit den
beiliegenden Kappen verschließen.
Level floor: Permissible floor gradient under entire washing machine
is 1˚ .
5
Power socket: Must be within 100 cm of either side of location of
washing machine. Do not overload the socket with more than one
appliance.
i
If after completing connection water leaks from the hose, repeat the same steps. Use the most conventional
Additional Clearance: For wall, floor and door space is needed.
type of tap for water supply. In case the faucet is square or too big, remove the spacing ring before inserting
(10cm: rear / 2cm:right & left side). Do not place or store laundry pro-
the tap into the adaptor.
ducts on top of the washing machine at any times. They can damage
the finish or controls of the machine.
6 Installation of drain hose
or
• The drain hose should not be placed higher than 100 cm above the floor.
• Proper securing of the drain hose will protect the floor from damage due to any water leakage.
• If the drain hose is too long do not force back into the washing machine. This will cause unusual noise.
Water supply pressure must be between 1.0-10 bar (100kPa~1000kPa)
7 Level adjustment
Don't strip or crossthread when connecting inlet hose to the valve.
• Proper level-adjustment of the washing ma-
If the water supply pressure is more than 1000kPa, a decompression
chine prevents excessive noise and vibration.
device should be installed.
Install the appliance on a solid and level floor
surface, preferably in a corner of the room.
• If the floor is uneven, adjust feet as required.
• Two rubber seals are supplied with the water inlet
(Do not insert pieces of wood etc. under the
hoses. They are used for preventing water leaks.
feet). Make sure that all four feet are stable
• Make sure the connection to taps is tight enough.
Adjustable feet Adjustable feet and resting on the floor. Then check that
• Periodically check the condition of the hose and the appliance is perfectly level. (Use a spirit
replace the hose if necessary. level).
• Make sure that there is no kink on the hose and that
it is not crushed.
8 CAUTION
• The appliance is not intended for use by young children or infirm persons without supervision.
• Young children should be supervised to ensure that they do not play with appliance.
Safety instructions for use
Safety instuctions for the installation
Read all instructions and explanations of the installation before use. Follow the instructions carefully. Keep the operating
Install or store appliance where it will not be exposed to sub-zero temperatures or exposed to the weather. Fit ground of the
instructions handy for later use. If the appliance is sold or passed on then ensure that the new owner always receives these
washing machine correctly to conform with all statutory regulations and ordinances. Ensure that the base opening is free from
operating instructions. The following warnings must be strictly observed for safety reasons. They must be read before instal-
obstruction by carpeting if the washing machine is installed on a carpeted floor. In countries where there is a risk of cockroach
ling the appliance and putting it into operation.
infestation or other vermin, pay particular attention to keep the appliance and its surroundings in a clean condition at all times.
Any damage which may be caused by cockroaches or other vermin is not covered by the appliance guarantee.
• Intended use: This appliance has been designed exclusively for use in dry-interior households. Use the appliance only
with cold drinking water and only for washing textiles with washing detergents designed for washing machines.
CAUTION about positioning the appliance
Every other use is improper and may lead to injuries, whereby the liability of the manufacturer will cease.
• This appliance may only be used by adults. Do not allow children to touch the controls or to play with the product.
Install the washing machine on a flat hard floor. Make sure that air circulation around the washing machine is
• Never modify the appliance on your own, as this is dangerous.
not impeded by carpets, rug etc.
• This appliance is heavy. Transporting with care.
• Never try to correct any unevenness in the floor using pieces of wood, cardboard or similar materials under the washing machine. • Remove all packaging and transport bolts before using the appliance. Otherwise serious damage may result.
• If it is not possible to position the washing machine away from a gas cooker or coal burning stove, an insulation panel • All installation work must be carried out by a qualified fitter or technician.
(85x60cm) covered with aluminum foil on the side facing the cooker or stove, must be inserted between the two appliances. • Have electrical connections done by a qualified electrician.
• The washing machine must not be installed in rooms where the temperature may drop below 0°C. • Never place the appliance on the power cord.
• Please ensure that when the washing machine is installed an engineer can gain easy access in the event of a breakdown. • If the appliance is placed on a carpet then place the feet so that air can circulate underneath the appliance.
• Adjust all four feet using the transit bolt spanner provided to ensure that the appliance is stable, with 20mm clearnace between
• Always unplug the machine and turn off the water supply after use. Disconnect appliance by pulling only the plug - never
the top of the washing machine and underside of the worktop.
disconnect by pulling the power cord. Never touch the plug with wet fingers or hands.
• Do not overload the appliance.
CAUTION about the power cord • Wash only machine-washable textiles. If you have doubts regarding this, then observe the markings on the label.
• Never place electrical heaters, candles etc. in the vicinity of the appliance. They could cause the appliance to ignite or
We recommend connecting most appliances to a dedicated circuit. That is, a single outlet supplying power only to the appliance
parts to warp.
concerned, without any additional outlets or branch circuits. Check the specifications of this owner's manual. Do not overload
• Protect the appliance from wet and damp. Otherwise, there is danger of electric shock and fire.
wall sockets. Overloaded wall sockets, loose or damaged wall sockets or extension cords, frayed power cords, damaged or
• Connect the appliance to a suitable wall socket for 220-240V. Never use an extension cord or double adapter.
cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the
• Empty all pockets. Hard or sharp objects such as coins, needles, nails, screws or stones may cause serious damage.
cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance,
Unbalanced mass may create heavy vibrations. If heavy vibrations remain also without load, call for an authorized
and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or
customer service.
mechanical abuse, such as being twisted, kinked, pinched, squashed in a jamb of a door, or walked upon. Pay particular atten- • Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive
tion to plugs, wall outlets, and the point where the cord exits the appliance. We recommend to use a residual current operated substances (such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.). This may result in fire
device in the mains supply.
or explosion.
• Never insert products coated with mineral oils (e.g. nylon coating, plastic belts, etc. ) into the machine. If a stain remover
has been used then make sure that the solvent has been carefully washed out before inserting the clothes into the
CAUTION about location and moving
appliance. Oil may remain in the tub after a whole cycle resulting in fire during drying. So, do not load oily clothes.
This equipment is not designed for maritime use or for use mobile installations such as caravans, aircraft etc. Turn off the stop- • Do not operate the appliance at locations where flammable substances are present such as oil, benzene or highly
cock if the machine is to be left for any length of time (e.g. if you are going on holiday), especially if there is no floor drain (gully) inflammable gas. Such materials may cause fire or explosion. Never use combustible detergents.
in the immediate vicinity. If relocating the appliance use the original packing material. Disable the door lock to prevent young • Only add the prescribed amount of softener. Excessive amounts may damage the clothes.
children becoming trapped inside. Packaging material (e.g. plastic film, Styrofoam) can be dangerous for children. There is a risk • After washing, keep the drum door open to protect the door seal.
of suffocation! Keep all packaging well away from children. • Make sure that all water has run off before opening the door. Never open the door if water still remains. Danger of
scalding.
• Animals and children may get into the washing machine. So always check the appliance before using it.
CAUTION about the floor surface
• During washing, the glass door becomes very hot. Keep children away from the appliance when in operation.
• The installation surface must be clean, dry and level. • Never try to repair the machine yourself. Incorrect repairs may result in injuries and/or serious defects to the machine.
• Install washing machine on a flat hard floor.
• The product should be serviced and repaired only by the authorised customer service using original replacement parts.
• Proper placement and levelling of the washing machine ensure long, regular and reliable operation.
• When disposing of your old machine, the power cable must be capped and the door lock must be made unusable in order to
• The washing machine must be perfectly level and firmly in position.
protect children.
• It must not "see-saw" across corners under load.
• When placing on a carpeted floor, make sure that the opening in the socket is not blocked.
• The installation surface must be clean, free from floor wax and other lubricant coatings.
• If the appliance has been under water then contact the customer service. There is danger of electric shock and fire.
• Do not allow the feet of the washing machine to get wet. If feet of the washing machine get wet, slipping may occur.
• The cover cup of the filter as well as the dispenser drawer may not be opened during the operation.
• Keep all washing powder and detergents away from children. Danger of poisoning
G arantiebedingungen
@ Technical Specification
Disposal • When this crossed-out wheeled bin symbol is attached to a product it means the product is covered
by European Directive 2002/96/EC.
Entsorgung von Altgeräten
• All electrical and electronic products should be disposed of separately from municipal waste stream
1. Wenn dieses Symbol eines durchgestrichenen Abfalleimers
Name of product Max. Watt auf einem Produkt angebracht ist, unterliegt dieses Produkt
Front loading washing machine 2100 W via designated collection facilities appointed by the government or the local authorities.
der europäischen Richtlinie 2002/96/EC.
2. Alle Elektro- und Elektronik-Altgeräte müssen getrennt vom • The correct disposal of your old appliance will help prevent potential adverse consequences for the
Power supply Wash capacity
220-240 V~, 50 Hz 8 kg Hausmüll über dafür staatlich vorgesehenen Stellen entsorgt
environment and human health.
werden.
3. Mit der ordnungsgemäßen Entsorgung des alten Geräts • For more detailed information about disposal of your old appliance, please contact your city office,
Size WxDxH mm: 600 mm x 590 mm x 850 mm Water consumption 56 (7 / kg)
vermeiden Sie Umweltschäden und eine Gefährdung der
waste disposal service or the shop where you purchased the product.
persönlichen Gesundheit.
Weight 63 kg Permissible water pressure 1.0-10 bar (100-1000kPa) 4. Weitere Informationen zur Entsorgung des alten Geräts
erhalten Sie bei der Stadtverwaltung, beim Entsorgungsamt
oder in dem Geschäft, wo Sie das Produkt erworben haben.
T N roubleshooting guide Troubleshooting
Symptom Possible Cause Solution
• Water supply is not adequate in Check another tap in the house.
area
• Water supply is not adequate in <Fig 1> Check another tap in the house.
• Water supply taps are not Fully open tap.
area
• Water supply taps are not completely open. Fully open tap.
• Water inlet hose(s) are kinked. completely open. Straighten hose(s).
• Water inlet hose(s) are kinked. Straighten hose(s).
• The filter of the inlet hose(s) are
• The filter of the inlet hose(s) are
clogged.
Check another tap in the house.
clogged. Check the filter of the inlet hose(s).
• If water leakage occurred in the inlet hose,
• Drain hose is kinked or clogged. Clean and straighten the drain hose.
indicator " " will be changed red color.
• The drain filter is clogged. Clean and straighten the drain hose. Clean the drain filter.
• Drain hose is kinked or clogged.
Clean the drain filter. For more detailed information,
• The drain filter is clogged.
For more detailed information,
please refer to "Cleaning the drain pump filter"
please refer to "Cleaning the drain pump filter"
• Load is too small. Add 1 or 2 similar items to help
• Load is too small.
• Load is out of balance. Add 1 or 2 similar items to help balance the load.
• Load is out of balance. balance the load.
• The appliance has an unbalance detection Rearrange load to allow proper
• The appliance has an unbalance detection Rearrange load to allow proper
and correction system. If individual heavy spinning
and correction system. If individual heavy spinning
articles are loaded (ex. bath mat, both robe,
articles are loaded (ex. bath mat, both robe,
etc.), this system may stop spinning or even
etc.), this system may stop spinning or even
interrupt the spin cycle altogether.
interrupt the spin cycle altogether.
• If the laundry is still too wet at the end of
• If the laundry is still too wet at the end of the
the cycle, add smaller articles of laundry to
cycle, add smaller articles of laundry to
balance the load and repeat the spin cycle. balance the load and repeat the spin cycle.
Close the door completely.
• Is the door opened or not • Is the door opened or not Close the door completely.
completely closed? If " " is not released, call for service.
completely closed? ❋ If " "is not released, call for service.
Unplug the power plug and call for service.
Unplug the power plug and call for service.
• Water overfills due to the faulty water
• Water overfills due to the faulty water valve. Close the water tap.
Close the water tap.
valve.
Unplug the power plug.
Unplug the power plug.
Call for service.
Call for service.
• Water level sensor has malfunctioned. • Water level sensor has malfunctioned.
• Over load in motor. • Over load in motor.
• Water leaks • The washer experienced a power failure. Restart the cycle.
Call for service.
• The washer experienced a power failure.
Restart the cycle.
Rattling and clanking noise Extraneous objects such as coins or safety pins maybe in drum or pump.
Thumping sound Heavy wash loads may produce a thumping sound. This is usually normal.
29
Vibrating noise
Have all transit bolts and packing been removed?
Water leaks. Check and tighten hose connections. Unclog drain pipe.
Contact plumber if necessary.
Excessive suds Too much detergent or unsuitable detergent.
Washing machine does not start Power cord may not be plugged in or connection may be loose.
Please read this owner's manual carefully, it provides instructions on safe installation, use and maintenance.
Washing machine won't spin Check that the door is firmly shut.
Keep it handy for future reference of this machine. Make a note of the model and serial numbers of your
Door does not open Once started, the door can not be opened for safety reasons.
Wait one or two minutes before opening the door to allow the electric
locking mechanism time to release.
CUSTOMER SERVICES Tel. : +44-(0) 844 847 LGLG(5454) Fax. : +44-(0) 844 847 1413
Owner's Manual
F1447TD(1~9)
F1247TD(1~9)
Before use please read carefully the safety instructions!
Thank you for buying an LG fully automatic washing machine.
washing machine.
For the U.K. customer
LGEUK SERVICE WEB-SITE : http://www.lge.co.uk
P/No. :MFL61988407