Connecting To A Dvd Player; Connecting To A D-Tv Set-Top Box - LG HX300G Owner's Manual

Connection

Connecting to a DVD Player

* Depending on the equipment, the component output jacks (Y, PB, PR) of the DVD Player may be labeled as Y, Pb, Pr/Y, B-Y, R-Y/Y, Cb, Cr.
< How to connect a HDMI source >
1 . Connect the HDMI of the projector and the HDMI out-
put port of the DVD Player with an HDMI cable.
2 . Set the DVD Player's resolution to one of the following:
480p(576p)/720p/1080i/1080p mode.
< How to connect a Component source >
1 . After connecting the Component cable of DVD Player
to the RGB to Component cable, connect it to the
RGB IN terminal of the projector.
* When connecting the component cable, match the jack
colors with the component cable.(Y=green, P
=red)
2 . Connect the AUDIO IN of the projector to the output
jacks of the audio source with an audio cable.

Connecting to a D-TV Set-Top Box

* To receive Digital TV (D-TV) programs, it is necessary to purchase a D-TV receiver (Set-Top Box) and connect it to
the projector.
* Please refer to the owner's manual of the D-TV Set-Top Box for the connection between the projector and D-TV
Set-Top Box.
< How to connect a HDMI source >
1 . Connect the HDMI of the projector and the HDMI out-
put port of the DTV set-top box with an HDMI cable.
2 . Set the DTV receiver's resolution to one of the follow-
ing: 480p(576p)/720p/1080i/1080p mode.
< How to connect a Component source >
1 . Connect the D-TV Set-Top Box Component cable with
RGB to Component cable and than connect it to RGB
IN of the projector.
* When connecting the component cable, match the jack
colors with the component cable.(Y=green, P
=red)
2 . Connect the AUDIO IN of the projector to the output
jacks of the audio source with an audio cable.
14
=blue, P
B R
RGB to Component
Cable
=blue, P
B R
RGB to Component Cable
HDMI Cable
<DVD Player>
Audio Cable
<DVD Player>
Component cable
<D-TV Set-Top Box>
HDMI Cable
Audio Cable
<D-TV Set-Top Box>
Component cable