When your fridge-freezer is installed, allow it 2-3 hours to
stabilize at normal operating temperature prior to filling
it with fresh or frozen foods.
If power plug is disconnected, allow 5 minutes delay
Your fridge-freezer is now ready for use.
Select a good location.
Place your fridge-freezer where it is easy to use.
Avoid placing the unit near heat sources,
direct sunlight or moisture.
There must be proper air circulation around your
fridge-freezer to keep it operating efficiently.
To avoid vibration, the unit must be leveled.
If required, adjust the leveling screws to compensate
for the uneven floor.
The front should be slightly higher than the rear to aid
in door closing.
Leveling screws can be turned easily by tipping the
Turn the leveling screws counterclockwise(
raise the unit, clockwise(
Clean your fridge-freezer thoroughly and wipe off all
dust accumulated during shipping.
Install accessories such as ice cube box, etc., in their
proper places.They are packed together to prevent
possible damage during shipment.
Connect the power supply cord (or plug) to the outlet.
Don't double up with other appliances on the same
To ensure proper air circulation around the fridge -
freezer, please maintain sufficient space on both the
sides as well as top and maintain at least 2 inches (5
cm) from the rear wall.
) to lower it.