Table of Contents
Advertisement
3 Get started
Always follow the instructions in this chapter in
sequence.
Install battery
Caution
•
Risk of explosion! Keep the battery away from heat,
sunshine or fire. Never discard battery in fire.
•
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
•
The battery contains chemical substances, so it should
be disposed of properly.
Note
•
You can only use AC power as power supply. The
lithium CR2032 battery can only back up clock and
alarm settings.
•
When power is disconnected, the display backlight is off.
For first-time use:
Remove the protective tab to activate the
battery.
To replace the battery:
1
Push the clip to the left and pull out the
battery tray.
2
Insert 1 x CR2032 battery as illustrated.
CR2032
CR2032
Connect power
Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the clock radio.
•
Risk of electric shock! When you unplug the AC plug,
always pull the plug from the socket. Never pull the
cord.
Connect the power adaptor to the wall outlet.
EN
5
Advertisement
Table of Contents
