Table of Contents
Advertisement
4 Play from
Bluetooth
devices
With this speaker, you can listen to audio from
Bluetooth-enabled devices.
Note
•
The speaker can memorize a maximum of four paired
devices. The fifth paired device will replace the first one.
•
Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
•
Keep away from any other electronic device that may
cause interference.
•
The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
•
Make sure that no audio input cable is connected to
the AUDIO IN socket.
Connect a device
1
Slide the source selector to .
» The LED indicator flashes blue.
2
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3
Select [Philips BT50] or [Philips BT25]
displayed on your device for pairing and
connection. If necessary, input "0000" as
the pairing password.
» After successful pairing and connection,
the speaker beeps twice, and the LED
indicator turns solid blue.
•
If you cannot find [Philips BT50] or
[Philips BT25] on your device, press
and hold PAIRING for more than
three seconds until you hear triple
beeps.
4
Play audio on the Bluetooth device.
Tip
•
You can use your Bluetooth device to control play.
LED indicator (blue)
Indicator
Fast flashing (2Hz)
Slow flashing (1Hz) Connecting
Solid blue
Disconnect a device
Press and hold PAIRING for more than
•
three seconds;
» The speaker beeps for three times.
•
Disable Bluetooth on your device; or
•
Move the device beyond the
communication range.
» The speaker beeps twice, and the LED
indicator flashes blue.
Note
•
Before connecting another Bluetooth device, disconnect
the current device first.
Bluetooth connection status
Pairing
Connected
EN
5
Advertisement
Table of Contents
