Cable Dtv Setting; Satellite Dtv Setting - LG 37LV550T Owner's Manual

34
WATCHING TV

Cable DTV Setting

(In Cable, Cable & Satellite(-Only Satellite models)
mode only)
The range that a user can select from the Service
Operator menu differs depending on number of
Service Operator supported by each country, and
if number of supported Service Operator for each
country is 1, corresponding function becomes non-
activation.
1
Press Home to access the Home menu.
2
Press the Navigation buttons to scroll to
SETUP and press OK.
3
Press the Navigation buttons to scroll to
SETUP and press OK.
4
Press the Navigation buttons to scroll to Cable
DTV Setting and press OK.
5
Press the Navigation buttons to scroll to Serv-
ice Operator or Channel Auto update and
press OK.
6
Select your desired Source.
7
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
NOTE
When Channel Auto Update is On, you can
y
update information for all the programmes
that can be updated, including the pro-
gramme currently being watched.
When Channel Auto Update is Off, you can
y
only update information for the programme
currently being watched.
You can not select the Cable DTV Setting
y
when the service operator is set to "Ziggo".

Satellite DTV Setting

(In Satellite, Antenna & Satellite, Cable & Satellite
mode only-Only Satellite models)
You can add or delete a satellite setting ID.
1
Press Home to access the Home menu.
2
Press the Navigation buttons to scroll to
SETUP and press OK.
3
Press the Navigation buttons to scroll to
SETUP and press OK.
4
Press the Navigation buttons to scroll to Satel-
lite DTV Setting and press OK.
5
Select your desired setting ID.
You can change the following settings for each
setting ID for your preferences.
Option
Satellite Select your desired Satellite.
LNB Select one value from Universal, 9750,
Frequency 10600, 5150.
If you select Universal for LNB Frequency
which is 9750/10600(MHz), 22KHz Tone
is disabled.
If you cannot find the LNB frequency value
from the list, select User and manually
enter the frequency.
22KHz Tone When using 22KHz Tone switch, select A
or B. If you use 22KHz Tone, Tone Burst
and Motorized System are disabled.
Tone Burst When using Tone Burst switch, select A
or B. If you use Tone Burst, 22KHz Tone
and Motorized System are disabled.
LNB Power To enable the power supply for the LNB,
select On.
If you select Off, Motorized System is
disabled.
DiSEqC When using DiSEqC, select one option
from DiSEqC A~D. If you use DiSEqC,
Motorized System is disabled.
Motorized When using the motor, select On. To set
System the antenna position, press OK button
and move the motor. If you use the motor,
22KHz Tone, Tone Burst and DiSEqC
are disabled.
Description